Modern printing due to the development of science and technology, proper usage of colorful technology can make the print appropriately reflect the willing of designers. The special process of garment tag is mainly concave-convex, hot anodized aluminum, embossing printing, embossing molding, waterborne glazing, molding, laminating, hollow molding, spot color and so on.
1. Concave and convex
According to the design needs, to convex part of the text, and then rolled into the cavity die with gypsum, the printed matter on the plate and machine lithography between pressure printing, resulting in concave and convex phenomenon. This kind of craft can create three-dimensional feeling, make the tag abound variation.
2. Anodized aluminum
In accordance with the design requirements, the graphic part of bronzing into relief plate, and installed on the machine, through the electric heating installation, heating anodized aluminum film, printing press through pressure operation to the substrate surface. This method is not only used for paper, but also for leather, textiles, wood, etc. There are many varieties of anodized aluminum at present. Such as laser foil, paper foil, leather foil, pigment foil and so on.
3. Embossed printing
This special process is to dissolve the resin powder in the wet (ink) or use the resin alone after printing, after heating to make the imprint ridges, protruding three-dimensional sense. It is mainly applied to the main image part of clothing tag.
4. Imprint and die cutting
When the tag printing needs to be cut into a special shape, the wood mold is made according to the requirements of the drawing, and the steel blade is surrounded and strengthened along the edge of the wood mold, and then the tag printing is cut into shape. Steel knife has sharp mouth and blunt mouth, sharp mouth will cut off the paper, and blunt will press the paper into marks, easy to fold to smooth neat and clean.
5. Glazing and laminating
The advantages of glazing can make the printed matter produce luster, and can make the surface of the printed matter is not easy to fade, prolong the preservation time of the color of the printed matter, enhance the strength of the paper, improve the waterproof and stain resistance, to enhance the added value of the printed matter. Glazing includes laminating, glazing oil, pressure gloss, pressure gloss oil, mirror glazing and other technologies. In addition, now based on the consideration of environmental protection, waterborne glazing, and other new environmental protection methods are more used in practice.
6. Molding
This process is mostly used in plastics. In the hanging tag design, the front end of the hanging tag is often used in the part of the brand connected with the hanging wire. It is hot pressed by a special mold and uses hot stamping technology to highlight the image and text of the brand, so that the vision of the hanging tag is expanded from flat paper to three-dimensional material.
7. Spot color printing
Print colors include CMYK, PANTONE, spot color, etc. Tag printing mostly adopts spot color printing, which has the advantage of uniform and full color, accurate standard color and little deviation, highlighting the standard color of enterprises or brands, which is conducive to promoting the corporate image.
Post time: Apr-23-2022
